Showing posts with label Antennas. Show all posts
Showing posts with label Antennas. Show all posts

Friday, October 1, 2021

Portable Shortwave Antenna...

 


I stumbled upon this in a batch of goodies I just got. Had not seen one in years. Even has the little antenna coupler still attached and working :-)



This neat little antenna will be handy when travelling, vacation, overnight fishing trips, etc. Stretch it out, slip the coupler over the collapsed antenna, and you're in business! Someone mentioned something similar is available from C-Crane.


Dave WB4IUY

WB4IUY.net

Sunday, November 26, 2017

Antenna work - 11/26/17

Finally had a little time to get back on my tower and get more antennas pulled up. I broke my Force-12 6 element HF yagi into 3 sections, pulled it up the tower, and reassembled it from up top. The assembly went well and it was an easy one-man job. Once in place, I got the feed line and rotator cable pulled up and connected. Here's a few pics from the work...

 A shot down the tower as I pulled up part of the yagi...


 Looking south at the reflectors...


 Looking north at the driven elements...


 Looking at the horizon to the west from about 105' up...


 A pic from the front yard, the yagi sits at about 105' up now...


 Looking north, over the boom, cam at about 107'...


 Looking down the tower, my feet are perched on the rotator plate...



 The view to the west is awesome from this height...


 Looking up from my driveway, things are beginning to come back together, finally.


 Looking up from the northern part of my front yard...



Time to build the next antenna for the stack and get it in position #2!


Dave WB4IUY
http://www.WB4IUY.net












Sunday, November 12, 2017

Antenna work - 11/12/17

I completed my HF yagi today, for installation on the rebuilt tower. For those who don't know, my tower of 23 years was torn down in a storm in April 2016, destroying all of the 17 antennas that had served me well for all those years. Everything from the vertical that had it's tip at 138' up, right on down to the lowest antennas that were only 30' up. In addition to storm damage to the house and workshop, the tower and antennas system created such a mess that I had to rent a crane / man lift to get it all down from the surrounding trees and untangle / remove the mess of tower that loomed over our home. You can see the system as it was before the storm on my website at www.wb4iuy.net , mouse over the [WB4IUY] in the toolbar at the top, and click on [Antennas] in the dropdown that appears. 

Today I completed the feed harness for the driven elements, built and installed a new RF current choke on the boom, and tuned this 6 element Force-12 HF yagi. I got this antenna used for a great price...it's a $1200+ antenna that I otherwise would have never bought, it just needed a little TLC to bring it back to life. It is a trapless design, perfect for operating with high power. 

If all holds well, it'll be going up on the tower next weekend, and I'll start the rebuild of the next antenna for installation. I can't wait to get this baby in operation!

 RF Choke wound from RG-214 and attached to the boom.


 Bottom view, coax attached and jumpers installed between driven elements...


 Side view, feedline attached and jumpers in place between driven elements...


 Shack side of RF choke feed strapped to the boom...





 Antenna tuned on 10m, had to shorten the elements, drill, and re-rivet to set length...


  Antenna tuned on 20m, lengthened the linear loads a little to move the sweet spot down the band a little...


  Antenna tuned on 15m, had to lengthen the elements, drill, and re-rivet to set length...


 Antenna analyzer connected for testing...


 15m elements lengthened a little...


 10m elements shortened a little to move the sweet spot up the band a bit...

Dave WB4IUY
http://www.WB4IUY.net









Antenna work - 11/11/17

I picked up this Force-12 6 element HF yagi right after my tower came down in the storm of April 2016. Being a used antenna, there were a few things I needed to do before installation. After sorting through things, I decided to modify the boom mount to best suit my installation, and split the boom into 3 pieces to allow for re-assembly from the top of the tower, as opposed to hauling the entire fully assembled antenna to the top. All bits are now assembled and installed on a temporary tower section, and ready for tuning.

Some of the parts laid out, prior to assembly...


Boom mounting plate on my old manual mill, about to be modified for best installation on my mast...


Awaiting surgery...


Drilled, milled, and ready to go...


Mocked up with some new hardware...


Modified mounting plate attached to the boom plate, ready for installation...



Mid-section of the boom bolted to a temporary tower section I stood up in the back yard for assembly of the antenna and testing, prior to being hauled up the big tower.


A shot down the boom after fitting all boom parts together...


Another look at the boom, assembled, from an angle...


20m Reflector installed...


20m driven element now installed...


All elements installed, and ready for the feed harness...

Dave WB4IUY






Thursday, December 22, 2016

Respect Your Antenna Insulators!

OK, so I got a little re-education on something I had forgotten tonight. Had a little time before dark to tweak on the 40m elements of my hexpole antenna (had to give it a snazzy name, it's just 3 dipole/inverted V antennas fed from the same feedline). Anyway, the 40m portions have been acting goofy and tougher than usual to tune.
The 40m legs needed to be lengthened a bit to move the resonant freq down a little. I made a pigtail, and attached it to the ends of the antenna. I didn't want it just hanging down (not that it matters), so I pulled it across the end insulators, and zip tied it to the paracord on the other side of the insulator. The paracord was a little damp, but didn't give it any thought. It's a synthetic cord, so no biggie, right?

I went in the shack, and checked it at 100w, and found the SWR dip to be about where I wanted it. I kicked on the amp, and loaded it up to 1,499 watts, and noticed the reflected powder to be a little quirky. Suddenly, everything went nuts and I shut it down. I walked out, looked up, and found one of ends of the 40m antenna to be hanging down by the tower, and the guy cord to be on the ground.

Duh, the high voltage points on that type of antenna are at the ends. The damp paracord, was not a good insulator. Arcing at the ends of the 40m elements had literally burned the cord off, flush with the ends of the antenna. I repaired the cord connections and let the ends of the tuning pigtail hang down (not across and against the paracord). All is well.

Gives new meaning to putting some "fire in the wire" :-)
Dave WB4IUY

Tuesday, December 13, 2016

160 Meter antenna up!

After finishing up a bit of Christmas shopping on Monday, there was time before dark to get the 3rd antenna up at about 70' in the group of HF dipoles I'm pulling up on my tower. These are being installed in a way that will allow for moving to a higher location in the future, as the tower work continues through the winter. Since winter caught up with me, I decided to get some low band stuff up, and will continue with the tower work as weather permits. All of these are fed with a common feed line, making expansion pretty easy. You can see the center insulator / feed point design a few blogs back. So far, this provides operation on 160m, 80m, and 40m (bottom end of all bands for CW operation) without a tuner. The 40m antenna also resonates on 15m nicely with a decent match.

There was an unexpected perk of 17 meters...I still can't figure out why, but SWR is pretty much flat on that band and it's working like gangbusters. It must be one of those situations where the feed line length is somehow hiding the reflected power, since I don't see a mathematical relationship with 160/80/40 & 17m. I don't care. it's working great :-)  I can also work 20, 12, 10, & 6 with a tuner, but they're probably very much a compromise at best. So, it'll work 160, 80, 40, 17, & 15 without a tuner, and i can crowbar it to work with a tuner on the others.

There's a separate sloper up at about the same height on 30 meters. I worked the Gambia tonight on 30m with my fan dipole and got a 559 report... I couldn't even hear them on the resonant 30m sloper, but then it is facing southwest. Anyway, here's a few pics...

The first picture is a zoomed in shot of the top of the tower & side arm, Taken from the sorta northeast. You can see the 3 dipole legs going north as leaving the sidearm and heading off the RH side of the photo. The 3 legs going south are those leaving the side arm and heading off of the lower LH corner of the photo.



Here's a "zoomed out" picture from pretty much the same location. This puts the height somewhat more in perspective.



 Adding the 160 meter antenna proved to be a bit more difficult. Since the tower is only 70' tall thus far, and the 160 m antenna is about 129' long on each side (!!! almost 260' of wire!), I had to get more creative then int he previous installation. My property is heavily wooded, so finding a clearing in the direction I wanted was tough. I intentionally wanted to install these antennas with the wires being north / south, so the strongest pattern would be east / west. To the north and south, the woods begin only about 70 away from the tower, meaning that I would only use up about 100' of wire before Id be in the trees. Wanting to keep it in an inverted V configuration (more omnidirectional), I attached an insulator to a tree in the edge of the woods at about 15' up, passed the antenna through the insulator, and tied it off to another tree about 30' away at about 15' up. When viewed from above, it would look like a mild "Z" shape. Here's a pic of the "feed-thru" insulator on the north side...


 Here's a shot of the "feed-thru" insulator on the south side. I used my tree-trimmer to clear a path through the vines and undergrowth, to give the antenna lead to stay free of things that might impact tuning.


In the center of the last photo, you'll see one of the white terminating insulators that attaches the whole lash up to a tree about 35' into the woods. one would thing this would be difficult to tune, but it wasn't. I cut the antenna length with the typical formula of 468 / Fmhz, and it worked out pretty close. The antennas are all built from 12 ga stranded THHN insulated single conductor wire. I find the insulation really helps with rain and snow static, as well as discharge noise on windy days.


After a brief test tonight, I got a signal report of 599 from KP4TF in Puerto Rico, a 559 from  SM5EDX in Sweden, and a 559 from 4O/KC0W in Montenegro. Nothing earth shattering, but I'm back on 160 meters for the winter. Once the tower is finished, I'll get it pulled up to about 130' at the apex, and it should play fine from there. To previous 160 V was up at 105', and it did great, working into Africa, Australia, New Zealand, etc.

Dave WB4IUY
http://www.WB4IUY.net



Sunday, December 4, 2016

Dirty Balun - Common Mode Choke Info

I stumbled across this on the web, and snagged it for my website. Great info from G3TXQ on the subject. I plan to buy some Amidon FB-31-1020 ferrite beads and rework my common mode choke at the feed points of my antennas, when I move them to a higher perch.



I've used the air-core version wound from feed line on my yagi's and dipoles since the 1970's to keep stray RF out of the shack, but it's easy to see the improvement in EMI blocking with the FB-31-1020 ferrite beads simply slipped over the feed line at the feed point connection. Here's his chart.




Be sure to check out his website for load of great info at

Dave WB4IUY
http://www.WB4IUY.net





Saturday, December 3, 2016

40 meter CW Antenna Up!

I'm moving along, slowly but surely... With winter moving in, I'm trying to get some antennas up and tuned, to hold me through the winter months. I'm laying them out with the ability to move them up to a higher perch, once the rest of my tower sections are stacked and readied in the spring.

Today, I had a little time before sunset and installed another antenna onto the center insulator I built a few blogs back. The way the side arm / current choke / center insulator are built, it's easy to add more antennas to the same feed point and feed line. I cut a new dipole to be resonant at about 7.050mhz, pulled it up the tower to the 65' point, connected it to the same feed point as the 80m inverted V, attached insulators to the far ends of the wire, and pulled it out to new anchor points that were basically north & south. The makes the antenna radiate a little more to the east & west, but being an inverted V, it is somewhat omni-directional anyway.

It worked out great, and didn't impact the operation of the 80m CW inverted V previously installed. Another added bonus, in addition to automatic band switching between 80 & 40 meters, is where the antenna is accidentally resonant across the 17M band. It's probably some unknown quirk where the current choke and length of feedline is hiding reflected power, but I don't care... the rig is happy, and it's working great on 17 meters to boot.

I've already worked in to the Czech Republic and Western Sahara with only 100 watts, and am thrilled! The match looks good, and the amp is very happy (for a change). It's time to grab a cold 807, put the headphones on, and get into some DXing! Here's a few pics...

The new 40m CW antenna seen from the south side of the tower. The 40m wire is the wire going towards the top of the pic with the insulator about 1/2 way out. The 80m wire is just above it...


The 40m CW antenna seen from the north side of the tower. You can see the 40m wire with the insulator in the upper center of the photo. The 80m antenna is almost invisible, just below and to the left of the 40m wire. 


Another pic of the antenna & tower, looking up the 40m CW antenna north leg. Can't wait to get the rest of the tower stacked up there!


I anchor my dipoles with "Para-Cord fro Walmart. Very inexpensive, strong, and is UV protected. This is about $3 for a 50' pack. It's easily joined if you need it longer, and it doesn't abreaid from tree limbes rubbing against it like the masonry cord I've used since the 70's. It's available in several colors, but I like this color as it blends in with the trees nicely. 
 

I drive a couple of 16P nails in the tree, splay them out slightly from one another, and use it to attach the paracord and wind the excess. It's easy to unwind when I want to drop an antenna for work. 


I ran a few tests and the new 40m CW antenna addition also tunes up on 15m (as it should) nicely, can't wait for the band to open tomorrow and give it a test.

Dave WB4IUY
http://www.WB4IUY.net





Sunday, November 27, 2016

80 Meter Antenna up!

Boy, this project is really dragging out.... this is the tower seen in previous blogs, that was torn up back in April of 2016 in a storm. It's now the end of November, and I'm just beginning to install some temporary antennas. I expected to be finished with the tower by now but work, storm damage repairs to our home, and remodelling of our home took priority. I've been operating with only a 30m sloper at about 68' on the west side of the tower, but it's a pitiful performer on other bands. On the bright side, I'm almost at DXCC on 30m, a band I almost never worked before :-)

A photo of the side arm, current choke, and low-end 80m Inverted V installed at about 65' on the east side of my tower. You can click on any of these photos for a larger view...
 


The tower is currently at about 70', and I have another 50' to install. Since it's late November, I realize the total rebuild likely won't happen before spring. With the winter months being the time I operate most, I decided I needed to get busy with some antennas. The antennas I install will be done with extra feedline included and built in a in a way that will allow me to simply cut the tape securing the coax and raise the mount once the remaining tower is installed.


A photo of the insulator used on the low end of the south leg of the next low-end 80m Inverted V.



This is the first of these antennas. I cut an inverted V for 3.550 mhz , to allow operation from about 3.500 mhz to 3.600 mhz at QRO without a tuner. The two wires were cut to 67'2", and this allows 9" for attachment to the strain relief at the feed point, and 6" for wrapping at the insulator. The tower side arm & current choke assembly from the previous blog was installed at about 65' up on the east side of the tower. It included a mount for a vertical antenna, but I haven't decided on that, yet. I attached the inverted V to the dipole feed point installed on the arm, with the antenna pulled north-south. While an inverted V is mostly omni-directional, this will allow for the lobes of strongest radiation to be east & west. The feedpoint was designed and fabricated to allow multiple dipoles to be attached, and more be added soon.

A photo looking up the south leg of the low-end 80m Inverted V antennas. Since the far ends are anchored to trees, I always leave a bit of sag in the wires.


 The antenna resonates about 3.550mhz, and is still less than 2:1 swr at 3.500 and 3.600. It was fed with CQ-1001 Flexi X-4xl RG-8 size coax from the Wireman. That feedline's loss properties are about .4db loss per 100' at 10mhz, and about .75db loss per 100' at 30mhz. I got a chance to test it out in the CQWW CW contest on Saturday night, and was very happy.At only 65' up at the apex, I was busting pileups all over Europe, some into Africa, South America, and later into the South Pacific. That'll hold me through the winter months, and I can't wait to get it up to at least 100' in the spring!

Dave WB4IUY
http://www.WB4IUY.net


A look up the tower, the side arm and 80m Inverted V is seen on the RH side of the tower in this picture.