This is a Swan 117XC power supply I got from the estate of Ken Stroud AB4RQ. It had been parked for many years, a paper tag on it indicated a problem in 1998. This is required to run the old Swan tube rigs from the 60's like the Swan 250, 350, 500s, etc.
I disassembled it and started by removing and treating rust, repairing a damaged speaker, compounding the front panel, and striping / reapplying the black wrinkle finish. I replaced all electrolytic caps, the 4.7 ohm resistor in the relay keying supply was at 15 ohms, and installed a new ne-2 neon power lamp. After reassembly, she runs like a new supply. It currently awaits restoration of some of the Swan radios I got from Ken's estate.
